To design and order your cabinetry we have two design tools:
  • Cabinet Designer
  • Cabinet Planner
  • The Cabinet Designer is used for designing and customising individual cabinets and the Cabinet Planner allows you to work out how the cabinets will be positioned to fit the space you have.

    You can move back and forth between the design tools to finesse your design, trying different configurations, sizes and materials.

    And to start you off we provide a set of template cabinets and template cabinet configurations. Load the templates into either the Cabinet Designer or Cabinet Planner and customise for the sizes and materials you want.

    Cabinet Designer My Order Cabinet templates Cabinet configurationtemplates My Cabinet {"w":600,"h":1000,"name":"My Cabinet","url":{"doh":"2","wf":"0","dm":"0","nd":"3","m":"svg"},"bottomleft":{"x":5.09,"y":531.38},"bottomright":{"x":89.94,"y":580.37},"topleft":{"x":5.09,"y":368.08},"topright":{"x":89.94,"y":417.07},"rearbottomleft":{"x":61.66,"y":498.72},"rearbottomright":{"x":146.51,"y":547.71},"reartopleft":{"x":61.66,"y":335.42},"reartopright":{"x":146.51,"y":384.41},"imagessize":{"w":246.51,"h":347.89},"scale":5,"xpos":100,"ypos":100,"drawmode":"0","positionx":"auto","positiony":"auto","positionz":"auto","cabmeta":{"materials":{"MDF18":3.620294},"cost":{"fixed":135},"uid":"doh2wf0dm0nd3msvg"}} My Cabinet {"w":600,"h":1000,"name":"My Cabinet","url":{"doh":"2","wf":"0","dm":"0","nd":"3","m":"svg"},"bottomleft":{"x":5.09,"y":531.38},"bottomright":{"x":89.94,"y":580.37},"topleft":{"x":5.09,"y":368.08},"topright":{"x":89.94,"y":417.07},"rearbottomleft":{"x":61.66,"y":498.72},"rearbottomright":{"x":146.51,"y":547.71},"reartopleft":{"x":61.66,"y":335.42},"reartopright":{"x":146.51,"y":384.41},"imagessize":{"w":246.51,"h":347.89},"scale":5,"xpos":100,"ypos":100,"drawmode":"0","positionx":"auto","positiony":"auto","positionz":"auto","cabmeta":{"materials":{"MDF18":3.620294},"cost":{"fixed":135},"uid":"doh2wf0dm0nd3msvg"}} My Cabinet {"w":600,"h":1000,"name":"My Cabinet","url":{"doh":"2","wf":"0","dm":"0","nd":"3","m":"svg"},"bottomleft":{"x":5.09,"y":531.38},"bottomright":{"x":89.94,"y":580.37},"topleft":{"x":5.09,"y":368.08},"topright":{"x":89.94,"y":417.07},"rearbottomleft":{"x":61.66,"y":498.72},"rearbottomright":{"x":146.51,"y":547.71},"reartopleft":{"x":61.66,"y":335.42},"reartopright":{"x":146.51,"y":384.41},"imagessize":{"w":246.51,"h":347.89},"scale":5,"xpos":100,"ypos":100,"drawmode":"0","positionx":"auto","positiony":"auto","positionz":"auto","cabmeta":{"materials":{"MDF18":3.620294},"cost":{"fixed":135},"uid":"doh2wf0dm0nd3msvg"}} My Cabinet {"w":600,"h":1000,"name":"My Cabinet","url":{"doh":"2","wf":"0","dm":"0","nd":"3","m":"svg"},"bottomleft":{"x":5.09,"y":531.38},"bottomright":{"x":89.94,"y":580.37},"topleft":{"x":5.09,"y":368.08},"topright":{"x":89.94,"y":417.07},"rearbottomleft":{"x":61.66,"y":498.72},"rearbottomright":{"x":146.51,"y":547.71},"reartopleft":{"x":61.66,"y":335.42},"reartopright":{"x":146.51,"y":384.41},"imagessize":{"w":246.51,"h":347.89},"scale":5,"xpos":100,"ypos":100,"drawmode":"0","positionx":"auto","positiony":"auto","positionz":"auto","cabmeta":{"materials":{"MDF18":3.620294},"cost":{"fixed":135},"uid":"doh2wf0dm0nd3msvg"}} My Cabinet {"w":600,"h":1000,"name":"My Cabinet","url":{"doh":"2","wf":"0","dm":"0","nd":"3","m":"svg"},"bottomleft":{"x":5.09,"y":531.38},"bottomright":{"x":89.94,"y":580.37},"topleft":{"x":5.09,"y":368.08},"topright":{"x":89.94,"y":417.07},"rearbottomleft":{"x":61.66,"y":498.72},"rearbottomright":{"x":146.51,"y":547.71},"reartopleft":{"x":61.66,"y":335.42},"reartopright":{"x":146.51,"y":384.41},"imagessize":{"w":246.51,"h":347.89},"scale":5,"xpos":100,"ypos":100,"drawmode":"0","positionx":"auto","positiony":"auto","positionz":"auto","cabmeta":{"materials":{"MDF18":3.620294},"cost":{"fixed":135},"uid":"doh2wf0dm0nd3msvg"}} My Cabinet {"w":600,"h":1000,"name":"My Cabinet","url":{"doh":"2","wf":"0","dm":"0","nd":"3","m":"svg"},"bottomleft":{"x":5.09,"y":531.38},"bottomright":{"x":89.94,"y":580.37},"topleft":{"x":5.09,"y":368.08},"topright":{"x":89.94,"y":417.07},"rearbottomleft":{"x":61.66,"y":498.72},"rearbottomright":{"x":146.51,"y":547.71},"reartopleft":{"x":61.66,"y":335.42},"reartopright":{"x":146.51,"y":384.41},"imagessize":{"w":246.51,"h":347.89},"scale":5,"xpos":100,"ypos":100,"drawmode":"0","positionx":"auto","positiony":"auto","positionz":"auto","cabmeta":{"materials":{"MDF18":3.620294},"cost":{"fixed":135},"uid":"doh2wf0dm0nd3msvg"}} My Cabinet {"w":600,"h":1000,"name":"My Cabinet","url":{"doh":"2","wf":"0","dm":"0","nd":"3","m":"svg"},"bottomleft":{"x":5.09,"y":531.38},"bottomright":{"x":89.94,"y":580.37},"topleft":{"x":5.09,"y":368.08},"topright":{"x":89.94,"y":417.07},"rearbottomleft":{"x":61.66,"y":498.72},"rearbottomright":{"x":146.51,"y":547.71},"reartopleft":{"x":61.66,"y":335.42},"reartopright":{"x":146.51,"y":384.41},"imagessize":{"w":246.51,"h":347.89},"scale":5,"xpos":100,"ypos":100,"drawmode":"0","positionx":"auto","positiony":"auto","positionz":"auto","cabmeta":{"materials":{"MDF18":3.620294},"cost":{"fixed":135},"uid":"doh2wf0dm0nd3msvg"}} My Cabinet {"w":600,"h":1000,"name":"My Cabinet","url":{"doh":"2","wf":"0","dm":"0","nd":"3","m":"svg"},"bottomleft":{"x":5.09,"y":531.38},"bottomright":{"x":89.94,"y":580.37},"topleft":{"x":5.09,"y":368.08},"topright":{"x":89.94,"y":417.07},"rearbottomleft":{"x":61.66,"y":498.72},"rearbottomright":{"x":146.51,"y":547.71},"reartopleft":{"x":61.66,"y":335.42},"reartopright":{"x":146.51,"y":384.41},"imagessize":{"w":246.51,"h":347.89},"scale":5,"xpos":100,"ypos":100,"drawmode":"0","positionx":"auto","positiony":"auto","positionz":"auto","cabmeta":{"materials":{"MDF18":3.620294},"cost":{"fixed":135},"uid":"doh2wf0dm0nd3msvg"}} Cabinet Planner
    Cabinet identification
    A name that will feature in the order list. This name will be used as a prefix on the label of every panel e.g [My Cabinet] Side left so it is preferable to keep it to less than 20 characters
    You can organise your cabinets into group e.g. Room1, Left hand side etc
    Any comments to tag with this design
    As you work with this design you can record any issues here for tracking
    Dimensions
    HWD
    The overall external dimensions of the cabinet
    External height dimension
    External width dimension
    External depth dimension
    Height of an integral/external plinth, or zero for no plinth
    Plinth type
    Determines whether the plinth is undercut
    Integral plinths can optionally have a height adjustment fitting giving +20mm of adjustment
    Height of the bottom of the cabinet above floor level (AFFL or FFL in Architect speak). For a floor standing cabinet this value will be zero but could be something like 50-100 if you are using an external plinth
    Doors
    ND
    Number of doors
    Materials
    Material carcass
    Material frontages
    For wide cabinets (greater than 1000mm wide) a Top Plinth is recommended
    Two pieces of the chosen carcass material are bonded together and edgebanded to create double thickness carcass (sides,top,bottom)
    Two pieces of the chosen carcass material are bonded together and edgebanded to create double thickness shelves
    The cabinet top/bottom overlap the sides
    The cabinet sides,top,bottom panels will have their ends bevelled at 45 degrees
    Drawers
    Blum Movento gives slow closing (Blumotion) or push-to-open movement as well as increased weight capacity (40Kg)
    Utilise the plinth space by adding a drawer here. Note: because the drawer will be at floor level you need your floors to be level or else make plans to level the cabinet above any floor undulation lest the drawers bind on the floor when extended
    Shelves
    Shelf grid
    Dividers
    Position of vertical divider measured from inside left of cabinet. Set to 0 for no divider.
    Position of horizontal divider measured from inside top of cabinet. Set to 0 for no divider.
    Position of dividers measured from front of cabinet.
    Advanced options
    Angles
    34.5
    Type of angle
    The cabinet is not angled and the top is square to the sides
    The cabinet is angled with different heights for the cabinet sides
    The cabinet is angled with the front higher than the rear
    Corner cabinet with front angled at 45 degrees
    Frontage config
    Frontage configuration
    Cabinet frontages overlay the front edges of the cabinet
    Cabinet frontages fit within the front edges of the cabinet
    Cabinet frontages fit within the front edges of the cabinet with horizontal frame pieces between drawer faces/doors
    Cabinet has a face frame and frontages fit within edges of face frame
    Fit and Finish
    Scribe pieces are 70mm wide strips that can be trimmed to give a fitted finish between cabinet and wall
    An end panel is used on the end of a run of cabinets to finish the end in the same material as the frontages and hide any fixings visible on the side
    Skirting around front and sides
    Specify the width of the scribe pieces needed below
    Width of scribe for left of cabinet or 0 for no scribe
    Width of scribe for right of cabinet or 0 for no scribe
    Width of scribe for top of cabinet or 0 for no scribe
    The end panel can be undersized/oversized in height/depth to aid scribing in if needed
    Positive to increase height, negative to decrease height
    Positive to increase depth, negative to decrease depth
    Will the top of the cabinet be visible in its final installed location e.g. this is a low unit
    Will the top of the cabinet be visible in its final installed location e.g. this will be wall mounted at high level
    Will the top of the cabinet be visible in its final installed location e.g. this is a free standing island unit
    Edgeband back edge of panels (top,bottom, sides)
    Edgeband top and bottom of side panels
    For U-shaped cabinet arrangements a front fix panel can be used to help fasten cabinets together
    Specify the width of the front fix panel
    Positive for front fix panel on left of cabinet, negative for front fix panel on right of cabinet
    Interior
    Clearances
    Space between top of cabinet frontage and carcass top
    Space between bottom of cabinet frontage and carcass bottom
    Space between side of frontages and carcass sides
    Space between adjacent features (doors/drawers)
    Back
    Replace solid back with two 100mm wide back rails top and bottom
    Omit a back panel completely. Note: a back panel is important to help guranteee cabinet rigidity. A backless cabinet will need careful securing to a wall to keep it rigid
    White plastic clips fitted inside the cabinet to connect the sides to the back
    Usually the back fits within the cabinet carcass but check this option to have a back panel that lays on (overlaps) the back edges of the cabinet
    A steel corner gusset that fits in the void behind the back panel (needs 16mm minimum service void)
    Usually we make the back flush. If you would like a service void between cabinet back and the wall specify the space here
    Machine for kitchen cabinet style wall hangers
    Machining
    Rafix fixings are additional fixings that have the following advantages i) the carcasss can be assembled without screws ii) No visible fixings in the outside of the cabinet iii) the cabinet can be built without access to the outside of the sides e.g. in an alcove
    A rectangular cutout located at the bottom rear of cabinet side panels such that the cabinet can sit flush against a wall with skirting
    Height as measured from floor level
    Depth measured from back
    {"cabname":"My Cabinet","drawergroup":"A","cabcomments":"","cabissues":"","height":"700","width":"400","depth":"400","bottompos":"50","plinthtype":"0","toekickspace":"0","plinthadjuster":"1","ffl":"50","doorhorz":"0","slidingdoors":"0","slidingdoorsPS10":"0","doorframepanel":"0","zeroprotrusion":"0","doorheavyduty":"0","dooraction":"0","doorhand":"LEFT","doorsvert":"1","ps10totalspan":"2000","material":"WHITE18","materialfront":"WHITE18","overlaptop":"0","toprail":"0","bottomrail":"0","topplinth":"0","doublethicknesscarcass":"0","doublethicknessshelves":"0","sideswithin":"0","mitredcarcass":"0","numberdrawers":"0","tandem":"0","plinthdrawer":"0","drawerproportions":"","doubledrawer":"0","topdrawer":"0","frontless":"0","internaldrawers":"0","packdrawers":"0","draweraction":"0","drawerheight":"default","drawerdepth":"default","numbershelves":"0","shelfoffset":"6","shelfspacing":"","shelfmeta":"","shelfcontinuousstuds":"0","shelfoptionstuds":"0","shelfcontinuousstudpitch":"50","shelfmetalstrip":"0","shelfgridopt":"0","shelfgridn":"1","shelfoffset1":null,"shelfoffset2":null,"dividerleft":"0","dividertop":"0","divideroffset":"2","angletype":"none","heightL":"700","heightR":"700","angleLR":"0","widthflat":"0","heightBack":"700","depthangle":"0","frontageconfiguration":"overlay","faceframewidth":"90","scribepieces":"0","endpanel":"0","skirting":"0","skirtingnotchheight":"100","endpaneldeltaheight":"0","endpaneldeltadepth":"2","visible_top":"0","visible_bottom":"0","visible_sides":"0","edgebandrear":"0","edgebandtopbottom":"0","frontfixpanel":"0","frontfixpanelwidth":"500","numberhangingrails":null,"numberlights":null,"clearancetop":"2.5","clearancebottom":"2.5","clearancesides":"2.5","clearance_features":"5","backrail":"0","backless":"0","backpanelclips":"0","backlayon":"0","backpanelgusset":"0","servicevoid":"0","cabinethangers":null,"machiningrafix":null,"skirtingnotch":null,"skirtingnotchdepth":"25"}
    Scenario name Recall scenario
    Overall Height(@h) Overall Width(@w)
    Horizontal division

    Plinth and scribes (fillers)

    Parameters for angled cabinetry

    £
    PAN UP PAN DOWN


    loadmaterials